News

The long-established company Stößer based in Bühl-Vimbuch near Baden-Baden (BW) used to work with a relatively small, manually loaded resaw. This old resaw that was supplied with material from an existing frame saw was…

Trotz fehlender Lehrlinge und offener Lehrstellen deutschlandweit, konnte Paul in Dürmentingen auch heuer wieder alle seine Plätze besetzen und trotzt damit erneut dem Fachkräftemangel. Am 1. September begannen 16 junge…

A major focus at the expo will be a rip and cross-cut system for the production of thick veneers, comprising a K34GV/800 ripsaw and a RAPID cross-cut system. Both machines are supplied with optimization data from a…

PAUL Maschinenfabrik of Dürmentingen recently developed a fully automated system for ripping and cross-cutting chipboard panels into scantlings. These are used as spacers for the internal and external transport of…

Am Samstag, 9. Juni 2018 lädt Paul in Dürmentingen von 10 bis 15 Uhr bereits zum fünften Mal zum „Tag der offenen Lehrwerkstatt“ ein. Die Azubis, deren hauptamtliche Ausbildungsmeister und Ausbilder informieren über die…

Glued laminated timber made of spruce and larch (formerly also often called glued timber or glued beams) consists of at least three board layers which are glued together in the same fiber direction. Glued laminated…

Dürmentingen/Bad Buchau – Am 8. Dezember 2017 fanden zahlreiche Mitarbeiter der Paul Maschinenfabrik den Weg zur Jahresabschlussfeier ins Kurzentrum nach Bad Buchau. Neben dem Jahresrückblick und den Ehrungen verdienter…

For many years the Busse Sawmill has been using the technologies of PAUL Maschinenfabrik (Dürmentingen/Germany). Due to the positive experience gained with its PAUL BM circular edger and 14_MKL CNC cross-cut system, the…